Posted on

Gibson Star Basket for 4 or 4.25″ Commander 1911. ***SOLD!***.

Gibson Gunleather and Bruce Gibson Design hand-stamped Star Basket, right-hand, high-ride belt slide pancake holster for the Commander length 1911 with 4, or 4.25-inch barrels.

The Star Basket pattern and border is not embossed–it is laid out and hand-stamped one tiny star at a time.  This process takes time, and hand-crafted attention to detail.

The sight track is molded in to accommodate the larger sights on modern pistols, and the stitching is flared to eliminate “sticking” or hanging up on the draw.

Retention is excellent.  Suitable for open or concealed carry.

Full trigger guard coverage, and cutaway for a comfortable, full-firing grip while holstered.

This holster is designed to fit dual-layer gun belts 1.5″ wide, and 1/4″ thick. This is a high-ride, open carry or concealed holster with a 15-degree muzzle-rear rake or cant.

The Natural oil finish will darken somewhat over time with exposure to sunlight.  A lot of folks describe this as “patina,” and it’s a really cool natural occurrence with veg-tan leather.

All we use is Premium American Hermann Oak vegetable tanned leather.  All proudly made in the USA.  Hermann Oak has been in the leather business in St. Louis, Missouri since 1881.  There is none better.

Heavy wheat colored nylon machine stitching.

Hand-fitted and hand-detailed. Holster edges are hand-beveled, waxed, finished, and burnished.

This holster is in-stock and ships via US Postal Service Priority Mail with delivery confirmation.

Satisfaction is guaranteed.

Replica gun, mags and other goodies are not included.

Questions are always welcome! And again, satisfaction is guaranteed.

Thank you for looking!

$125.00 with Free Priority Mail shipping with Delivery Confirmation and tracking.

***SOLD***

Posted on

“Thin Blue Line” leather cuff bracelet.

I didn’t have a clue that this item would get the attention it has.  We’ve added it to the Shop, so if you want one, you can click the link below and have a look for information and ordering.

We’ll have a size/sizing chart put together shortly, but in the meantime, just measure around your wrist OVER your wrist bone, and we’ll build it from there.

Here’s the link to the “Thin Blue Line” cuff bracelet:  https://www.brucegibsondesign.com/product/gibson-leather-cuff-bracelet-thin-blue-line-2-wide/

Posted on

Sewing machines, stitchers, profanity & thoughts of violence.

dscn3647

 

DISCLAIMER:  The following article contains profanity.  Cuss words.  Depending on your level of tolerance, you may or may not be offended.  No discussion of leather machinery, particularly leather stitching machines, can be had without cussing.  No honest discussions, at least.  Sincere apology, in advance.   

If you’re in the leather business, or leaning that way, sooner or later you’ll deal with what I’d call the nightmare that shits on the dream.  It’s all fun and games until you get your first leather sewing machine, or “stitcher.”  I say your first because there can never be just one.

You will get one.  You’ll begin to covet, to justify, to shop around.  You’ll convince yourself that your work will improve, become more consistent, and a hundred times more efficient.  The math will prove, again and again, that a powered leather-stitching behemoth is an absolute necessity.  For my part, I would agree.

Over a decade ago, I had to have one.  The big, grey Asian-import beast arrived from China by way of California on an 18-wheeler that was unable to navigate the two-rut sand trail that I live on.  A friend with a hardware store and a forklift lifted the pallet-strapped monster into the back of my pickup truck, and I brought the 750-pound monster home.

I was excited.  My wife, not so much.  They say “ignorance is bliss,” and when it’s applied to heavy leather stitching machines, they’re not far off.  I think that wives have a sixth sense about stupid shit their husbands do/buy/collect.

This being Florida, the weather was perfect for my new arrival.  Around 150-degrees Fahrenheit, and sauna-level humidity with intense, roasting fire ants with a magnifying glass, sunshine.  “Sunshine.”  It looks like such a happy word.  It’s not.

Long story short, I got the beast off the pallet, all assembled, plugged in, and tested.  She worked perfectly.  Beautiful, snug, six stitches per inch through over ¼ inch of Hermann Oak’s finest veg-tan leather.  I was soaked with sweat, dehydrated, having visions and passing out, but I was ecstatic.  This was the most beautiful, grey hunk of cast iron I’d ever seen.  So what if she dripped oil like an old Harley, and kinda stunk a little.

In my little corner of the leather world there are four of these babies.  Three that make my life a living hell, and one that gathers cobwebs in my barn.

My favorite one, is the one in the barn.  It’s also the only one made in America, but that was many, many years ago, and we don’t do that anymore.  Make sewing machines, that is.  I digress.

Holsters and belts are a large part of what I do.  I use these oil-soaked, needle-bending, unpredictable machines for the stitching on these products.  In general, the stitcher isn’t called on to do anything until all the high-stress, creative, fine work is done.  The stamping, the floral carving, the creasing, the dyeing.  In other words, when you reach the point of maximum time and money invested in an item, it’s time to sew it.  Hours, usually, have been spent getting everything as perfect as you can.  Hours…

dscn3651

Now it’s time to entrust your creative treasure to the beast.  You’ve cleaned it, oiled it, threaded it carefully, checked the bobbin—twice.  Checked the bobbin again, and checked the needle…again.  You’ve talked to it gently, encouragingly.  You have looked this soulless chunk of cast iron evil over for any potential problem.  Prayed, cursed that you had to go through all this preparation, then prayed some more and begged forgiveness for the earlier cursing and frustration.

But wait, there’s another step.  Scrap leather—test pieces.  Always run a few test pieces.  Never just turn the machine on and sew something.  Never.

Your test pieces will be perfect.  99.999% of the time.  Perfect.  Back and front.  Ahhh, life is good.  The miracle of the lockstitch.  Chinese engineering.  That’s why they’re called test pieces.  Because they will be perfect.  Not just damn good…PERFECT.

Now for the product—the holster, the belt, whatever.  It doesn’t matter.  Hold your breath (even if it takes 20-minutes for this stitch job).  Breathing can piss off the stitcher gods.  Set the needle, decide you don’t want the bulk of a backstitch, and touch the foot pedal.  Walk that baby, slow.  Ignore the fraying of the thread…one stitch and you can fix that at the end—just don’t…please don’t let it break.  Ahhh…son of a b—no, it’s okay.  Three stitches down, backside should be good, let go of the thread, pause a second and steal a breath to make the spots and faintness go away.  Wipe your sweaty, machine oil-drenched palms on your pants.  Try not to hyperventilate, and start again.  Don’t look ahead of your stitch line, take it slow, don’t worry about the cramp in your leg.  Focus.  Ignore the pain.  Be thankful there’s no blood—yet.

Done!  Finally!  Still conscious!  It doesn’t look that bad.  It doesn’t look that great, either.  Cut the threads—leave enough to pull them up tight.  Evaluate, critique.  Take a half-hour to get your respiration back to normal.  Turn the machine off, and give it a little pat.  Pray, giving thanks, and swearing not to cuss and throw tantrums in the future.

Take a little break.  Some time to reflect on why you bought a big leather stitcher in the first place.  Not to mention the two others your dumb ass ordered to keep the first one company.  Contemplate therapy, then convince yourself that therapy is for sissies.  You got this.

Make more stuff.  And, repeat.

Posted on

In “awl” seriousness…this is the best DVD on hand-sewing I’ve ever seen.

I’m a huge fan of hand-sewing leather.  Tapered, beeswaxed linen thread.  Polished, razor sharp awl blades.  Band-Aids, taped fingers.  I love everything about it.  Not to mention the strength and beauty of the stitching when it’s done right.

DSCN2273

This DVD covers everything–from tapering linen thread, to the proper threading of the needles.  Sharpening, polishing and “tuning” of your awl blades, and the actual sewing itself.  The headstall project’s a handy real world example of what’s possible.  Highly recommended.  75 minutes in length, and packed full of information.

Awl hafts and blades from Barry King Tools.  You can order the DVD from TJ at Schwarz Productions.com